• Brighten up dull coloured stones.
• Makes it easy to wipe off stain of lipsticks, markers, pens, paints, oil, tea, coffee, foot marks, mud etc.
• Highly water-repellent and weather-resistant.
• Forms a visible, transparent film.
• Solvent base which gives good penetration.

Directions for use

1. Shake well before use
2. Be sure surface is clean and damp free
3. Mask off and protect any surfaces not  intended to be treated
4. Apply an even coat on surfaces being  treated using brush or roller
5. Allow sealer to penetrate surface for 30-40 minutes while spreading sealer over entire area to ensure even penetration.
6. Apply second coat as needed for porous, absorbent surfaces. Apply 30-40 minutes after first coating as directed in step 3 & 4.
7. Remove excess sealer by wiping surface thoroughly with clean, dry white towels.
8. A full cure is achieved after 24-72 hours. Foot traffic may begin in 6-8 hours.
9. Typical coverage 60 sq. feet per litre depending on porosity of surface.
10. Can be used on all natural and artificial stone

Precautions:

1. Surface temperature should be between 50°F and 80°F.
2. Ensure that the area is well ventilated during application and the surface is dry.
3. Irritating or harmful to the skin, eyes or respiratory tract. May cause allergic reaction.
4. Material bottle lid should not be kept open for long time during application
5. DO NOT KEEP PRODUCT JAR OPEN FOR MORE THAN 10-15 MINS
6. Do not dilute the product.
7. Product is inflammable so avoid contact with fire and keep away from direct sunlight.

Benefits:

• Enhances the color of stone without altering the stone’s natural crystalline structure.
• Will not build-up on the stone surface.
• Prevents dirt from adhering to stone surfaces.
• Simple to apply.
• Slip and scuff resistant.
• Protects the stone surface.

Colour Enhancer – Gloss

• Give a wet glossy look to coloured stones.
• Makes it easy to wipe off stain of lipsticks, markers, pens, paints, oil, tea, coffee, foot marks, mud etc.
• Highly water-repellent and weather-resistant.
• Forms a visible, transparent film.
• Solvent base which gives good penetration.

Directions for use

1. Shake well before use
2. Be sure surface is clean and damp free
3. Mask off and protect any surfaces not intended to be treated
4. Apply an even coat on surfaces being  treated using brush or roller
5. Allow sealer to penetrate surface for 30-40 minutes while spreading sealer over entire area to ensure even penetration.
6. Apply second coat as needed for porous, absorbent surfaces. Apply 30-40 minutes after first coating as directed in step 3 & 4.
7. Remove excess sealer by wiping surface thoroughly with clean, dry white towels.
8. A full cure is achieved after 24-72 hours. Foot traffic may begin in 6-8 hours.
9. Typical coverage 60 sq. feet per litre depending on porosity of surface.
10. Can be used on all natural and artificial stone

Precautions:

1. Surface temperature should be between 50°F and 80°F.
2. Ensure that the area is well ventilated during application and the surface is dry.
3. Irritating or harmful to the skin, eyes or respiratory tract. May cause allergic reaction.
4. Material bottle lid should not be kept open for long time during application
5. DO NOT KEEP PRODUCT JAR OPEN FOR MORE THAN 10-15 MINS
6. Do not dilute the product.
7. Product is inflammable so avoid contact with fire and keep away from direct sunlight.

Benefits:

• Enhances the color of stone without altering the stone’s natural crystalline structure.
• Will not build-up on the stone surface.
• Prevents dirt from adhering to stone surfaces.
• Simple to apply.
• Slip and scuff resistant.
• Protects the stone surface.

Applications:

• Granite
• Marble
• Slate
• Terra Cotta
• Travertine
• Limestone
• Ceramic and Porcelain Tile
• Concrete
• Bricks

Textures/Surfaces:

• Polished
• Honed
• Flamed
• Tumbled
• Cross Cut
• Bush Hammered