Stain repellent for natural & artificial stones

• Protects against water & oil-based stains
• Preserves stone’s natural beauty
• Good for natural stone countertops
• Solvent base which gives good penetration
• Best for interior and exterior stone application

Directions for use

1. Shake well before use
2. Be sure surface is clean and damp free
3. Mask off and protect any surfaces not intended to be treated
4. Apply an even coat on surfaces being treated using brush or roller
5. Allow sealer to penetrate surface for 30-40 minutes while spreading sealer over entire area to ensure even penetration.
6. Apply second coat as needed for porous, absorbent surfaces. Apply 30-40 minutes after first coating as directed in step 3 & 4.
7. Remove excess sealer by wiping surface thoroughly with clean, dry white towels.
8. A full cure is achieved after 24-72 hours. Foot traffic may begin in 6-8 hours.
9. Typical coverage 125 sq. feet per litre depending on porosity of surface.
10. Can be used on all natural and artificial stones.

Precautions:

1. Surface temperature should be between 50°F and 80°F.
2. Ensure that the area is well ventilated during application and the surface is dry.
3. Irritating or harmful to the skin, eyes or respiratory tract. May cause allergic reaction.
4. Do not dilute the product.
5. Product is inflammable so avoid contact with fire and keep away from direct sunlight.

Applications:

• Granite
• Marble
• Slate
• Terra Cotta
• Travertine
• Limestone
• Ceramic and Porcelain Tile
• Concrete
• Bricks

Textures/Surfaces:

• Polished
• Honed
• Flamed
• Tumbled
• Cross Cut
• Bush Hammered

BENEFITS:

• Provides excellent stain protection.
• Acts as an excellent grout release.
• Prevents the growth of bacteria and mildew on interior and exterior stone.
• Simple to apply and user friendly.
• Helps prevent adhesion and penetration of fluids and dirt.
• Safe for contact of membranes.